The Conduit King® XL Cable Drive is a heavy-duty conduit tool designed for professional electricians who require smooth, controlled feeding of cable snakes through conduit systems. Engineered for commercial and industrial conduit installations, the Conduit King XL improves efficiency, reduces friction, and helps maintain consistent cable placement during demanding cable pulling applications.
This user manual provides detailed information on installation, operation, safety precautions, troubleshooting, warranty coverage, and compliance standards for the Conduit King XL Cable Drive. The tool is intended for use in de-energized environments where controlled cable handling is required.
1. Product Description
The Conduit King XL Cable Drive is a tool accessory designed to assist in guiding and feeding cable snakes efficiently through tight conduit runs, bends, and long installations. It supports cable snakes ranging from 9mm to 14mm in diameter and is compatible with commonly used professional cable snake materials.
Cable snakes not included.
Supported Cable Snake Types
- Nylon-coated cable snakes
- Spring steel cable snakes
- Fiberglass cable snakes (within supported diameter range)
2. Included Components
Each Conduit King XL Cable Drive package includes:
- 1 × Conduit King® XL Cable Drive unit
- 1 × Drill attachment
3. Intended Use
The Conduit King XL Cable Drive is designed for professional use during conduit installations involving cable pulling and cable feeding operations. The tool is intended for de-energized applications only and must be operated in accordance with the safety instructions outlined in this manual.
The Conduit King XL is commonly used by electricians during commercial and industrial conduit installations that require controlled cable movement through tight spaces or long conduit runs.
4. Safety Instructions
General Safety Warnings
- Read this user manual carefully before operating the Conduit King XL Cable Drive.
- Use the tool only for its intended purpose as described in this manual.
- Never use excessive force, as this may damage cable snakes or the feeder mechanism.
- Keep hands, fingers, and loose clothing clear of all moving parts during operation.
- Always store the device in a dry environment when not in use.
- Dispose of worn or damaged components responsibly.
- Always keep the drill in the clockwise / forward / drilling setting.
- Never use an impact driver with the Conduit King XL Cable Drive.
Failure to follow these instructions may result in equipment damage or personal injury.
5. Compliance Notice
The Conduit King XL Cable Drive is designed in compliance with AS/NZS 62079:2001, ensuring structured, clear, and professional instructional content. This product does not fall under electrical certification requirements and complies with applicable safety obligations under Australian Consumer Law (ACL).
6. Installation Instructions
- Place the Conduit King XL Cable Drive on a stable, flat surface near the conduit entry point.
- Align the cable drive with the intended cable pathway.
- Ensure the conduit pathway is clear before feeding the cable snake.
- Secure the cable drive in position if required to prevent movement during operation.
- Confirm the drill is set to the clockwise / forward / drilling setting before attaching.
Never use an impact driver.
7. Operating Instructions
- Insert the cable snake into the Conduit King XL guide mechanism.
- Grip the cable drive firmly by the handle (refer to diagram below).
- Slowly operate the drill to feed the cable snake through the conduit.
- Maintain steady, controlled movement to ensure smooth cable feeding.
- Adjust positioning as necessary to prevent cable snake tangling or resistance.
- Once the operation is complete, remove the cable snake and power down the drill.
- Clean the tool and store it in a dry location after use.
⚠ The drill must always remain in the clockwise / forward / drilling setting.
8. Troubleshooting Guide
Issue: Cable snake becomes jammed
- Possible cause: Misalignment
- Solution: Reposition the Conduit King XL Cable Drive and retry
Issue: Excessive force required
- Possible cause: Cable snake diameter too large
- Solution: Use a thinner cable snake or adjust the feeding angle
Issue: Device feels unstable
- Possible cause: Unsecured placement
- Solution: Secure the cable drive before operation
9. Warranty & Consumer Rights
Warranty Information
- The Conduit King XL Cable Drive includes a 12-month limited warranty covering defects in materials and workmanship under normal use.
- The warranty does not cover accidental damage, unauthorized modifications, or normal wear and tear.
- Proof of purchase is required for all warranty claims.
- If a manufacturing defect is confirmed, return shipping costs will be covered by FM Enterprises WA PTY LTD.
- This warranty is provided in addition to rights and remedies available under Australian Consumer Law.
Consumer Guarantee Statement
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
10. Warranty Claim Process
To submit a warranty claim:
- Contact customer support at admin@fmenterpriseswa.com
- Provide proof of purchase and details of the issue
- Return the product if requested
- Claims will be assessed and resolved within a reasonable timeframe
11. Compliance & Contact Information
The Conduit King XL Cable Drive complies with AS/NZS 62079:2001 for user instructions and meets applicable safety requirements under Australian Consumer Law (ACL).
Manufacturer & Support Contact:
FM Enterprises WA PTY LTD
Malaga, Perth, Western Australia 6090
Email: admin@fmenterpriseswa.com
Diagram Reference
- Drill attachment
- Forward mechanism
- Reverse mechanism
- Handle
- Entry point
- Exit point
